Difference between revisions of "C64Net Wireless Internet (WiFi) Modem"

Revision as of 20:57, 22 February 2018

C64Net WiFi card hardware design and construction by Carlos Santiago from www.ElectronicsIsFun.com

Compatible with VIC-20, C-64, and C-128 User Port.
Supports DCD, 300-9600 baud (with UP9600 compatible client), and hardware flow control
Supports BBS programs!
Programmable from BASIC using standard KERNAL calls
Numerous example BASIC utilities, ML source, and GEOS programs

1. Make the modem according to the schematics above.

2. Ether compile the source from here or download the compiled binary here.

3. Follow the instructions here to flash the firmware.

4. Check out the firmware docs here.

5. Download some Commodore 64 and Commodore 128 (40 or 80 col) utilities here.

6. Read the docs for the C64/C128 utilities and programming the modem from BASIC here.

Here are a picture of the fabricated Rev1, Rev2, Rev3, and Rev4

This is the first hand wired prototype of the C64Net.

Top of the rev1 prototype modem

Bottom of the rev1 prototype modem

@@ Line 7: / Line 7: @@
 * Programmable from BASIC using standard KERNAL calls
 * Numerous example BASIC utilities, ML source, and GEOS programs
+'''[https://electronicsisfun.com/c64net-wifi Purchase an assembled modem Here]'''
 '''[http://coffeemud.net:8080/ctcug/firmware/c64net_apps_latest.d64 Download the C= Applications Disk Here]''' (updated 8/19/2017)